How to start-up in industry - Easy Kits

How to start-up in industry - Easy Kits

Hi, we’re back with another blog full of tips and tricks to help you get the most out of this ever-confusing industry! 

This time around, we’re going to be helping you figure out how to get an all-in-one solution to your stapling and nailing problems. A regular phone call that we get often get goes something like... “Help! I need everything!” 

When you need a tool, a compressor, airlines and fasteners, all in one go, it can be a very daunting task. So much compatibility checking, trying to personalise your products to your needs - let’s not forget how expensive it can all be too! Whether you need to upgrade everything at once, are working on a specialist project, or just starting out in the industry, we realise something needed to be done to accommodate these ‘I need everything’ moments. 

So, many moons ago, we sat down at MyToolkit HQ and brainstormed ideas to come up with a solution that would help those in need. After lots of coffee and biscuits, we had a real lightbulb moment – EASY KITS! 

We bundled up a selection of our customer favourites into handy starter kits so you can really have a one-stop-shop for everything you need. 

We currently have 19 fantastic easy kits that we have put together. Each tool was carefully selected from a pool of our most popular listings, and paired up with a compressor that will work with it in perfect harmony. We also pop the matching airline in the box; we fit your tool with the correct airline fitting; and also add a box of staples or nails to complete the kit. How easy is that! 

Starter-kits we have on offer for... upholsterers: 

Upholstery Compressor Kits: We have 8 different air compressor stapler kits that would complement an upholsterer like a dream. These are made up of the TacwiseBostitch and BEA 71 Series Staplers, alongside the Evolve Eco 6L, Senco 3.8L and the Bostitch 6L Compressors. Just choose your perfect combination and tell us which size 71 series staples you need and we’ll do the rest! 

Starter-kits we have on offer for…the general joiners: 

Joinery Compressor Kits: There are 6 excellent options for those general joiners out there, using one of our most popular and all-time favourite tools. We have joinery tool kits with the Tacwise 18 Gauge Brad Nailer and also Type 90 Series Stapler. You can personalise it by choosing either the Evolve Eco 6L, the Bostitch 6L, or the Senco 3.8L compressor to go with it! Just add your 18 Gauge brad nail or 90 Series staple length and we’ll do all the hard work for your joinery starter kit. 

Starter-kits we have on offer for…the flooring contractors: 

This is the section where we really impress you! Firstly, we have 3 flooring kits that also double up as fantastic general joinery kits: the Tacwise 90 Series Stapler with one of our three fantastic compressors (Evolve Eco 6L, Bostitch 6L and Senco 3.8L). We also have 2 specialist flooring kits that are really something special. There is our Coil Nailer Kits, the RGN45 is one made by ourselves however the SFN19 is outsourced and comes with an additional (absolutely HUGE) toolbox on wheels. The dimensions are; 200m width, 760mm length & 200mm height and for context, this kit will arrive on a pallet! 

SFN19 Flooring Kit - pallet

So, there you have it! 

All of our fantastic easy kits, designed completely with our customers in mind. They’ll save you the headaches of checking all the components match, as well as saving you a lot of time browsing on different product pages, and most importantly, saving you from the headaches of this confusing industry.  

Take a look through all of our kits here. 

If you’re still not sure on which one is right for you, give one of our experts a call on 0333 8000 345, or drop us a line with your query. 

If you don’t see a kit that suits your needs, but would like to discuss a bespoke kit made up just for you, then don’t hesitate to get in contact. 

Anyway, that’s it from us – we look forward to hearing from you! :) 


Back to blog

Leave a comment

Please note, comments need to be approved before they are published.