“Worth paying a bit more for a brand like this” – a very happy customer!
This Stanley Bostitch 23 Gauge Headless Pinner oozes quality. From the online reviews down to the projects it creates, there is no doubt this tool has a big fan following.
The slide open, auto-adjusting magazine is easy to load, and the fine nose allows the pins to enter the wood precisely and smoothly. This Bostitch lightweight 23G Pinner also has an air regulator for adjustment designed for improved results on both hard and soft woods. This makes the tool an excellent all-rounder – definitely worth the slightly higher price tag.
Safety is also one of this tool’s main concerns with a secondary trigger needed to be activated to produce the pins – no more accidents! Whether you’re using this tool for fine beading and moulding, or for furniture manufacture, you’ll be more than satisfied with what it has to offer. Parts are readily available for this tool in the unlikely chance you may require any!
The Bostitch 23 Gauge Headless Pinner drives 23 Gauge Headless Pins in lengths 12mm to 30mm. We have these pins readily available in Liquor, Galvanised, and Stainless Steel (anti-rust) finishes. Take a look at our range here!
Congratulations – your tool gets FREE Next Working Day delivery! Make sure to place your order before 3.30pm and we’ll send it out that day! If you order after 3.30pm, we’ll send it straight out the next day!
Want to ask us any questions? Either give us a call on 0333 8000 345 or drop us a short message using our online form!
Take a 3 minutes out to watch our handy review video below and pick up some tips.
Power type: Pneumatic
Weight 0.9 kg
Width 40 mm
Length 230 mm
Height 198 mm
Magazine capacity (max) 200
106 Series Fasteners:
Diameter (mm) 6 (min) 0.6 (max)
Length (mm) 15 (min) 30 (max)
Head (mm) 6 (min) 0.6 (max)
Operating pressure 80 - 7.00 BAR
00 - 100.00 PSI
Air Consumption Ltr.per shot @ 5.6 bar 52
Air fitting thread type 1/4 BSP
Noise LPA 1sd 10
LWA 1sd 10
LPA 1s, 1m 90
Vibration / Uncertainty < 2.5 / N/A m/s2
Beading and moulding
Carpentry and Joinery in general
Much more....where secret pinning is required
Stanley Bostitch offer different warranty periods for different parts. Here is a breakdown of what is covered and for how long.
12 Month Warranty:
This warranty covers all housing and the cap of the tool. This warranty does not cover normal wearing parts such as the bumper, driver blades, O-rings, and piston rings.